Salicru
VR EQX

VR EQX

Salicru’s VR EQX range of voltage regulators for mains-connected photovoltaic installations prevent outages due to over/under voltage in the power line. Most regulations governing this type of system’s connection to the grid require solar inverters to shut down if their voltage exceeds certain limits. The VR EQX range is predominantly designed for grid-connected solar photovoltaic…

Discover>
Hybrid – Three Phase

Hybrid – Three Phase

The EQUINOX2 HT three-phase hybrid solar inverters retain the features of the single-phase EQUINOX2 HSX range, for application in installations with 3 x 380 V / 3 x 400 V. As such, we can continue to speak of maximum versatility. The EQUINOX2 HT has up to six operating modes: general or automatic mode, peak load…

Discover>
Hybrid – Single Phase

Hybrid – Single Phase

The EQUINOX2 HSX range of single-phase hybrid solar inverters makes maximum use of energy generated for self-consumption. On the one hand, like the On-Grid models of the EQUINOX2 S/SX/T series, high-energy efficiency continues to be an important factor for EQUINOX2 HSX. However, the extreme versatility is an even more crucial factor. The EQUINOX2 HSX devices…

Discover>
On Grid – Three Phase

On Grid – Three Phase

EQUINOX2 T solar inverters present a complete three-phase range, with competitively priced high performance, without sacrificing the slightest bit of quality. The exceptional design, focused above all on functionality and reduction of thermal stress of the equipment, ensures ease of assembly, minimal installation space, durability, and constant performance. Aesthetically, it has been decided to follow…

Discover>
On Grid – Single Phase

On Grid – Single Phase

The new solar power inverters in Salicru’s EQUINOX2 S/SX series are an excellent option for generating photovoltaic power in homes and commercial premises, allowing users to capture clean, cheap energy from the roof of their building. Their stand out for their compact size, ease of installation and optimal heat dissipation. Internally, the device is equipped…

Discover>
ACV30-PV

ACV30-PV

The ACV30-PV cabinets offer a fully finished solution for solar-powered pumping facilities that use pumps of up to 5.5 kW. Depending on the model, they can be mounted indoors or outdoors, and offer the option of isolated systems (powered solely by solar panels), systems with automatic switchover to the power generator or mains, and systems…

Discover>
CV30-PV

CV30-PV

The CV30-PV drive allows water to be pumped using the radiation captured by solar panels as an energy source. The solar light energy obtained is transformed into direct current which powers the drive, and this in turn powers a submersible pump using alternating current, thus enabling water from the ground to be extracted. The extracted…

Discover>
CV50

CV50

Salicru’s Controlvit CV50 variable frequency drive series covers power ratings that range from 0.75 kW to 500 kW. They are suitable for both constant and variable torque applications (power duality), and therefore allow the costs of the system to be optimised by adapting to the type of load to be regulated. They stand out for…

Discover>
CV30

CV30

Salicru’s Controlvit CV30 variable frequency drive series stands out for its design, reliability, compact size and ease of use. The high quality of its components, advanced features and versatility make it the ideal variable frequency drive for the actuation of low-power motors (0.4 kW to 7.5 kW) in the vast majority of applications, being available…

Discover>
CV10

CV10

Salicru’s Controlvit CV10 variable frequency drive series offers the most competitive solution for a wide range of applications. With a single-phase input voltage, it is designed to operate with low-power motors and has very complete hardware that features, among other things, a removable keypad with built-in potentiometer, dynamic braking unit, RS-485 Modbus communication and natural…

Discover>